DMAEN=0, TESTOUTEN=0, DACBFWM=00, DACRFS=0, DACBTIEN=0, DACSWTRG=0, DACBWIEN=0, BFOUTEN=0, DACBFWMF=0, DACTRGSEL=0, LPEN=0, DACBFEN=0, DACBBIEN=0, DACBFRPBF=0, DACBFMD=00, DACEN=0, DACBFRPTF=0
DAC Status and Control Register
| DACBFRPBF | DAC Buffer Read Pointer Bottom Position Flag 0 (0): The DAC buffer read pointer is not equal to DACBFUP. 1 (1): The DAC buffer read pointer is equal to DACBFUP. |
| DACBFRPTF | DAC Buffer Read Pointer Top Position Flag 0 (0): The DAC buffer read pointer is not zero. 1 (1): The DAC buffer read pointer is zero. |
| DACBFWMF | DAC Buffer Watermark Flag 0 (0): The DAC buffer read pointer has not reached the watermark level. 1 (1): The DAC buffer read pointer has reached the watermark level. |
| DACBBIEN | DAC Buffer Read Pointer Bottom Flag Interrupt Enable 0 (0): The DAC buffer read pointer bottom flag interrupt is disabled. 1 (1): The DAC buffer read pointer bottom flag interrupt is enabled. |
| DACBTIEN | DAC Buffer Read Pointer Top Flag Interrupt Enable 0 (0): The DAC buffer read pointer top flag interrupt is disabled. 1 (1): The DAC buffer read pointer top flag interrupt is enabled. |
| DACBWIEN | DAC Buffer Watermark Interrupt Enable 0 (0): The DAC buffer watermark interrupt is disabled. 1 (1): The DAC buffer watermark interrupt is enabled. |
| LPEN | DAC Low Power Control 0 (0): High-Power mode 1 (1): Low-Power mode |
| DACSWTRG | DAC Software Trigger 0 (0): The DAC soft trigger is not valid. 1 (1): The DAC soft trigger is valid. |
| DACTRGSEL | DAC Trigger Select 0 (0): The DAC hardware trigger is selected. 1 (1): The DAC software trigger is selected. |
| DACRFS | DAC Reference Select 0 (0): The DAC selects DACREF_1 as the reference voltage. 1 (1): The DAC selects DACREF_2 as the reference voltage. |
| DACEN | DAC Enable 0 (0): The DAC system is disabled. 1 (1): The DAC system is enabled. |
| DACBFEN | DAC Buffer Enable 0 (0): Buffer read pointer is disabled. The converted data is always the first word of the buffer. 1 (1): Buffer read pointer is enabled. The converted data is the word that the read pointer points to. It means converted data can be from any word of the buffer. |
| DACBFMD | DAC Buffer Work Mode Select 0 (00): Normal mode 1 (01): Swing mode 2 (10): One-Time Scan mode 3 (11): FIFO mode |
| DACBFWM | DAC Buffer Watermark Select 0 (00): In normal mode, 1 word . In FIFO mode, 2 or less than 2 data remaining in FIFO will set watermark status bit. 1 (01): In normal mode, 2 words . In FIFO mode, Max/4 or less than Max/4 data remaining in FIFO will set watermark status bit. 2 (10): In normal mode, 3 words . In FIFO mode, Max/2 or less than Max/2 data remaining in FIFO will set watermark status bit. 3 (11): In normal mode, 4 words . In FIFO mode, Max-2 or less than Max-2 data remaining in FIFO will set watermark status bit. |
| TESTOUTEN | DAC test output enable 0 (0): Disable DAC test output 1 (1): Enable DAC test output |
| BFOUTEN | DAC output buffer enable 0 (0): Disable DAC output buffer 1 (1): Enable DAC output buffer |
| DMAEN | DMA Enable Select 0 (0): DMA is disabled. 1 (1): DMA is enabled. When DMA is enabled, the DMA request will be generated by original interrupts. The interrupts will not be presented on this module at the same time. |
| DACBFUP | DAC Buffer Upper Limit |
| DACBFRP | DAC Buffer Read Pointer |